Solo the selected band(s)
Bypass the selected band.
Default: Enabled
By default the maximum value issued from all channels feeding the side chain is retained as source for processing. This manner, the space information is kept for the processed multi-channel signals.
When disabled, every channel uses its own value for individual processing. This configuration may be used in conjunction with the MS width section which encode the signal in MS before processing, and decode at the output. This manner, the M signal can be processed while keeping the S channel untouched.
Unit: dB
Value Range: -12 / +12
Step: 0.01
Default Value: 0 dB
Sets the gain applied to the dynamic processing input of the selected band.
Unit: dB
Value Range: -12 / +12
Step: 0.01
Default Value: 0 dB
Sets the global gain applied to the dynamic processing output of the selected band.
When engaged, the Bitter Sweet processing is active.
Unit: %
Value Range: -100 to +100
Default Value: 0
On the Sweet side (left), transients are reduced. It usually decreases percussive instruments in the mix.
On the Bitter side (right), transients are magnified. It usually increases the percussive instruments in the mix.
When engaged, the Bitter Sweet processing is done after the dynamic processing. Otherwise, it’s done before the other processing sections which are working in parallel.
When engaged, the output gain is compensated depending of the transient amount to produce an almost unity gain.
This control sets the release time for the transient envelop.
Main processes using regular stereo signal scheme and it is the only available mode for multi-channels operations. Center engages internal MS encoder and processes only the Mid channel. After processing the sound is decoded back to stereo. Since the M channel usually features more enregy than the S channel, this mode allows to easily control the impact of the sound.
Stereo engages internal MS encoder and processes only the Side channel. After processing the sound is decoded back to stereo. Since the S channel contains the spatial information, this mode allows to easily control the stereo imaging.
Unit: ms
Value Range: 3 to 450 ms
Default Value: 42 ms
This control sets the range of the time window used to detect transients that will be processed.
Unit: dB
Value Range: -6 / +6
Step: 0.01
Default Value: 0
Sets the stereo width of the processed signal. A -6 dB value deceases the stereo width. A +6 dB value increases the wideness of the stereo mix but can produce phase issue.
Default Value: Off
Enables one MS encoding matrix at the input and one MS decoding matrix at the output of the dynamic processing in order to control the stereo width of the mix. When engaged, the side chain is fed by a MS encoded signal that is reflected in the display section. The M channel corresponds to the normal left channel. And the S channel corresponds to the normal right channel This feature is only available when two channels (no more, no less) are processed.