Vu-meter not peak-meter, referenced to -16 dB Fs by default, with auto scale depending of the threshold values. When the MS Width section is engaged, the M (Mid) level is displayed on the left meter. S (Side) is displayed on the right meter.
The green index reflects the threshold value.
Vu-meter not peak-meter, referenced to -16 dB Fs by default, with auto scale depending of the threshold values. When the MS Width section is engaged, the M (Mid) level is displayed on the left meter. S (Side) is displayed on the right meter.
Vu-meter not peak-meter, referenced to -16 dB Fs by default.
The scale is +/- 12 dB.
This is the compression, decompression, expander and de-expander summing envelop.
This display doesn’t directly reflect the gain changes introduced by the Bitter Sweet section which can be placed pre or post parallel dynamic processors.
Vu-meter not peak-meter, referenced to -16 dB Fs by default.
The scale is +/- 12 dB.
This display doesn’t directly reflect the gain changes introduced by the Bitter Sweet section which can be placed pre or post parallel dynamic processors.
Vu-meter not peak-meter, referenced to -16 dB Fs by default.
The scale is +/- 12 dB.
This is the compression, decompression, expander and de-expander summing envelop which also takes account of the input and output gains of the band.
This display doesn’t reflect the gain changes introduced by the Bitter Sweet section.
The Bitter Sweet action can be observed on the main display.
No scale
The current L.I.D. Threshold value is reflected by two green lines on the Dynamic Activity display.
For Compressor and DCompressor sections, the L.I.D. action is effective only when the orange Dynamic Activity exceeds the area between the two green lines.
For Expander and DExpander sections, the L.I.D. action is effective only when the orange Dynamic Activity stays inside the area between the two green lines.
Auto Scale depending of the release value(s)
Auto Scale depending of the threshold value(s)