all_docs
Setup
Signal generator setup options.
Output
Selects the hardware output(s) to which the signal generator should be routed. Set to? None? to disable the signal generator output entirely.
Output 1
First generator output.
Output 2
Second generator output.
Both signals sent to the hardware output channels are identical.
Feed input reference
Fed the reference input (default input 1) with the signal generator.
Sine frequency
Sets the frequency of the sine generator, only applicable when the signal type is set to Sine.
Sweep start/end frequencies
Sets the range of frequencies to sweep.
Reverse start and end frequencies to obtain reverse sweep.
Sweep length
Sets the overall duration of the sweep in seconds,i.e. the time taken to go from start to end frequency.
Level
Generator output level in dB RMS.