Clicking the Geek glasses opens a window with an additional range of parameters providing extended control of the transient processing envelope.
Diff. / Dyn. Band | Hold |
Attack | Release |
Diff. is a key listener for the Difference between input and output signal (at the final output, after the clipper).
Value Range: Enabled/Disabled
Default Value: Disabled
Dynamic Band adjusts the frequency bandwidth of the Peak, when a Peak is defined with the Dynamic Range filter, per default the it’s static, which makes the bandwidth of the peak gain independent, and with Dynamic, the bandwidth becomes gain dependent.
Value Range: Enabled/Disabled
Default Value: Enabled
Adjusts the attack time for the transient processing envelope.
Value Range: 0.00 ms / 200.00 ms
Default Value: 0.00 ms
Adjusts the hold time for the transient processing envelope.
Value Range: 0.00 ms / 200.00 ms
Default Value: 0.00 ms
Adjusts the release time for the transient processing envelope.
Value Range: 0.00 ms / 500.00 ms
Default Value: 0.00 ms