Display

Resulting Transfer Curve (35)

Auto Scale depending of the threshold value(s)

Input Level Meter (36)

Vu-meter not peak-meter, referenced to -16 dB Fs by default, with auto scale depending of the threshold values.
When the MS Width section is engaged, the M (Middle) level is displayed on the left meter. S (Side) is displayed on the right meter.
The green index reflects the threshold value.

Output Level Meter (37)

Vu-meter not peak-meter, referenced to -16 dB Fs by default, with auto scale depending of the threshold values.
When the MS Width section is engaged, the M (Middle) level is displayed on the left meter. S (Side) is displayed on the right meter.

Resultant Envelop (38)

Vu-meter not peak-meter, referenced to -16 dB Fs by default.
The scale is +/- 12 dB.
This is the compression, decompression, expander and de-expander summing envelop.

Dynamic difference between in and out (39)

Vu-meter not peak-meter, referenced to -16 dB Fs by default.
The scale is +/- 12 dB.

Level difference between in and out (40)

Vu-meter not peak-meter, referenced to -16 dB Fs by default.
The scale is +/- 12 dB.
This is the compression, decompression, expander and de-expander summing envelop which also takes account of the input and output gains of the band.

Dynamic Activity Display (41)

No scale
The current Hysteresis Threshold value is reflected by two green lines on the Dynamic Activity display.
The hysteresis action is effective only when the orange Dynamic Activity stays inside the area between the two green lines.

Instant Release Value (42)

Auto Scale depending of the release value(s)